Броячи, свързани с продукти за откриване
Броячите на Autonics, свързани с продукти за откриване (фотоелектрически детектори, индуктивни сензори, крайни превключватели и др.) или продукти за диалог (бутони, превключватели и др.) може да се използват за осигуряване на допълнителна функция на системата за контрол.
- Характеристики
• Компактни LCD броячи – серия LA8N
• Програмируеми броячи/ таймери – серия CT
• Индикатори – серия FXY
• Броячи/ таймери – серия FXS
• Броячи/ таймери – серия FX/FXH/FXL
• Броячи с 8 пина – серия FS
• Броячи с 8 цифров дисплей – серия F/L
• Броячи – серия FM/LM
- Ползи
Лекота и бързина на сглобяване с оптимална за потребителя конфигурация.
- Приложения
• при всякакви поточни линии за: количествен контрол, измерване на дължината, контрол на позиционирането.
Разгледайте пълната продуктова гама тук.
Галерия
|
Model |
Брояч CX6S-□P□□ |
Брояч CX6M-□P□□ |
|
Contact control output |
Relay |
|
|
Type (1-stage) |
SPDT (1c) × 1 |
SPDT (1c) × 1 |
|
Type (2-stage) |
SPST (1a) × 2 |
SPDT (1c) × 2 |
|
Capacity |
≤ 250 VACᜠ 3 A, ≤ 30 VDCᜡ 3 A resistive load |
≤ 250 VACᜠ 3 A, ≤ 30 VDCᜡ 3 A resistive load |
|
Solid-state control output |
- |
NPN open collector |
|
Type (1-stage) |
- |
× 1 |
|
Type (2-stage) |
- |
× 2 |
|
Capacity |
- |
≤ 30 VDCᜡ, 100 mA |
|
Voltage |
AC voltage type |
AC / DC voltage type |
|
Power supply |
100 – 240 VACᜠ ± 10% 50 / 60 Hz |
24 VACᜠ ± 10% 50 / 60 Hz, 24 – 48 VDCᜡ ± 10% |
|
Power consumption CX6S-1P□ |
Dependent on the model ≤ 6.4 VA AC: ≤ 5.5 VA, DC: ≤ 3.5 W |
|
|
External power supply 01) |
≤ 12 VDCᜡ ± 10% 100 mA |
|
|
Memory retention |
≈ 10 years (non-volatile semiconductor memory type) |
|
|
Insulation resistance |
≥ 100 MΩ (500 VDCᜡ megger) |
|
|
Dielectric strength |
3,000 VACᜠ 50 / 60 Hz for 1 minute |
|
|
Noise immunity |
± 2 kV square wave noise (pulse width: 1 ㎲) by the noise simulator |
± 500 V square wave noise (pulse width: 1 ㎲) by the noise simulator |
|
Vibration |
0.75 mm double amplitude at frequency of 10 to 55Hz (for 1 minute) in each X, Y, Z direction for 1 hour |
|
|
Vibration (malfunction) |
0.5 mm double amplitude at frequency of 10 to 55Hz (for 1 minute) in each X, Y, Z direction for 10 minute |
|
|
Shock |
300 m/s2 (≈ 30 G) in each X, Y, Z direction for 3 times |
|
|
Shock (malfunction) |
100 m/s2 (≈ 10 G) in each X, Y, Z direction for 3 times |
|
|
Relay life cycle |
Mechanical: ≥ 5,000,000 operations Electrical: ≥ 100,000 operations |
|
|
Ambient temp. |
- 10 to 55 ℃, storage: - 25 to 65 ℃ (no freezing or condensation) |
|
|
Ambient humi. |
35 to 85% RH, storage: 35 to 85% RH (no freezing or condensation) |
|
|
Protection rating |
IP65 (front part, IEC standard) |
|
|
Model |
Брояч CX6S-1P□□ |
Брояч CX6S-2P□□ |
Брояч CX6M-1P□□ |
Брояч CX6M-2P□□ |
|
Display digits |
6-digit |
|||
|
Display method |
7-segment (1st, 2nd digits of counting value display: white, setting value display: green), 11-segment (the other digits of counting value display: white) LCD |
|||
|
Character size |
W × H (unit: mm) |
|||
|
Counting value |
4.1 × 10.1 |
6.2 × 15.2 |
||
|
Setting value |
3.3 × 8.1 |
5 × 12.3 |
||
|
Counter |
Count up, count down, count up / down |
|||
|
Counting range 01) |
- 99999 to 999999 |
|||
|
Timer |
Count up, count down |
|||
|
Repeat / SET / voltage / Temp. Error |
CX6□- CX6□- |
|||
|
Input logic (Брояч CX6□-□P□) |
Voltage input (PNP) – input impedance: 10.8 kΩ, [H]: 5 – 30 VDCᜡ, [L]: 0 - 2 VDCᜡ No-voltage input (NPN) – s hort-circuit impedance: ≤ 1 kΩ, short-circuit residual voltage: ≤ 2 VDCᜡ |
|||
|
Input logic (Брояч CX6□-□P□F) |
Free voltage input – INA (START), INB (INHIBIT) input, [H]: 24 – 240 VACᜠ 50 / 60 Hz / 24 – 240 VDCᜡ [L]: 0 – 10 VACᜠ / VDCᜡ No-voltage input – RESET input, short-circuit impedance: ≤ 1 kΩ, short-circuit residual voltage: ≤ 2 VDCᜡ |
|||
|
One-shot output time |
0.01 to 99.99 s |
|||
|
Unit weight (packaged) |
Dependent on the model |
|||
|
Брояч CX6□-□P4 |
≈ 112 g (≈ 157 g) |
≈ 117 g (≈ 162 g) |
≈ 170 g (≈ 235 g) |
≈ 175 g (≈ 240 g) |
|
Брояч CX6□-□P4F |
≈ 110 g (≈ 155 g) |
≈ 115 g (≈ 160 g) |
≈ 168 g (≈ 233 g) |
≈ 173 g (≈ 238 g) |
|
Брояч CX6□-□P2 |
≈ 111 g (≈ 156 g) |
≈ 116 g (≈ 161 g) |
≈ 169 g (≈ 234 g) |
≈ 174 g (≈ 239 g) |
|
Брояч CX6□-□P2F |
≈ 109 g (≈ 154 g) |
≈ 114 g (≈ 159 g) |
≈ 167 g (≈ 232 g) |
≈ 172 g (≈ 237 g) |
|
Approval |
|
|||
|
Model |
Брояч CTS□-□□□ |
Брояч Брояч CTY□-□□□ |
Брояч CTM□-□□□ |
|
|
Display digits |
4-digit |
6-digit |
6-digit |
6-digit |
|
Display method |
7-segment (counting value: red, setting value: green) LED |
|||
|
Character size |
W × H (unit: mm) |
|||
|
Counting value |
6.5 × 10 |
4.5 × 10 |
4.2 × 9.5 |
6.6 × 13 |
|
Setting value |
4.5 × 8 |
3.5 × 7 |
3.5 × 7 |
5 × 9 |
|
Counter |
Count up, count down, count up / down |
|||
|
Counting range 01) |
- 999 to 9999 |
- 99999 to 999999 |
||
|
Timer |
Count up, count down |
|||
|
Error |
Repeat / SET / voltage / Temp. – P ower ON Start: ≤ ± 0.01 % ± 0.05 sec Signal ON Start: ≤ ± 0.01 % ± 0.03 sec |
|||
|
Input logic |
Voltage input (PNP) – input impedance: 5.4 kΩ, [H]: 5 – 30 VDCᜡ, [L]: 0 – 2 VDCᜡ No-voltage input (NPN) – s hort-circuit impedance: ≤ 1 kΩ, short-circuit residual voltage: ≤ 2 VDCᜡ |
|||
|
One-shot output time |
0.01 to 99.99 s |
|||
|
Product components |
Product, instruction manual |
|||
|
Bracket |
Mounted |
× 2 |
× 2 |
|
|
Unit weight (packaged) |
≈ 159 g (≈ 212 g) |
≈ 140 g (≈ 228 g) |
≈ 252 g (≈ 322 g) |
|
|
Approval |
|
|||
|
01) It varies depending on the setting of decimal points. |
||||
|
Model |
Брояч CTS□-□□□ |
Брояч CTY□-□□□ |
Брояч CTM□-□□□ |
||||||||
|
Contact control output |
Relay |
||||||||||
|
Type (1-stage) |
SPDT (1c) × 1 |
SPDT (1c) × 1 |
SPDT (1c) × 1 |
||||||||
|
Type (2-stage) |
SPST (1a) × 2 |
Standard: SPST (1a) × 1, SPDT (1c) × 1 Communication: SPST (1a) × 2 |
SPST (1a) × 1, SPDT (1c) × 1 |
||||||||
|
Capacity |
250 VACᜠ 5 A, 30 VDCᜡ 5 A resistive load |
250 VACᜠ 3 A, 30 VDCᜡ 3 A resistive load |
250 VACᜠ 5 A, 30 VDCᜡ 5 A resistive load |
||||||||
|
Solid-state control output |
NPN open collector |
|
|||||||||
|
Type (1-stage) |
Standard: × 1, Communication: - |
Standard: × 1, Communication: × 1 |
Standard: × 2, Communication: × 2 |
||||||||
|
Type (2-stage) |
Standard: × 1, Communication: - |
Standard: × 1, Communication: - |
Standard: × 3, Communication: × 2 |
||||||||
|
Capacity |
≤ 30 VDCT, 100 mA |
≤ 30 VDCᜡ, 100 mA |
≤ 30 VDCᜡ, 100 mA |
||||||||
|
Voltage |
AC voltage type |
AC / DC voltage type |
|||||||||
|
Power supply |
100 – 240 VACᜠ ± 10 % 50 / 60 Hz |
24 VACᜠ ± 10 % 50 / 60 Hz, 24 – 48 VDCᜡ ± 10 % |
|
||||||||
|
Power consumption |
≤ 12 VA |
AC: ≤ 10 VA, DC: ≤ 8 W |
|||||||||
|
External power supply |
≤ 12 VDCᜡ ± 10 % 100 mA |
||||||||||
|
Memory retention |
≈ 10 years (non-volatile semiconductor memory type) |
||||||||||
|
Insulation resistance |
≥ 100 MΩ (500 VDCᜡ megger) |
||||||||||
|
Dielectric strength |
2,000 VACᜠ 50 / 60 Hz for 1 minute |
||||||||||
|
Noise immunity |
± 2 kV square wave noise (pulse width: 1 ㎲) by the noise simulator |
± 500 V square wave noise (pulse width: 1 ㎲) by the noise simulator |
|||||||||
|
Vibration |
0.75 mm double amplitude at frequency of 10 to 55 Hz (for 1 minute) in each X, Y, Z direction for 1 hour |
||||||||||
|
Vibration (malfunction) |
0.5 mm double amplitude at frequency of 10 to 55 Hz (for 1 minute) in each X, Y, Z direction for 10 min |
||||||||||
|
Shock |
300 m/s2 (≈ 30 G) in each X, Y, Z direction for 3 times |
||||||||||
|
Shock (malfunction) |
100 m/s2 (≈ 10 G) in each X, Y, Z direction for 3 times |
||||||||||
|
Relay life cycle |
Mechanical: ≥ 1,000,000 operations, Electrical: ≥ 100,000 operations |
||||||||||
|
Ambient temperature |
- 10 to 55 ℃, storage: - 25 to 65 ℃ (no freezing or condensation) |
||||||||||
|
Ambient humidity |
35 to 85% RH, storage: 35 to 85% RH (no freezing or condensation) |
||||||||||
|
Protection rating |
IP65 (front part, IEC standard) |
||||||||||
|
Comm. protocol |
Modbus RTU (16-bit CRC) |
||||||||||
|
Model |
Брояч FX4S-1P□ |
Брояч FX5S-I□ |
|
Display digits |
4-digit |
5-digit |
|
Character size |
W 3.8 × H 7.6 mm |
W 4 × H 8 mm |
|
Max. counting speed |
1 / 30 / 2 k / 5 kcps |
|
|
Return time |
≤ 500 ms |
|
|
Min. signal width |
INHIBIT, RESET: ≈ 20 ms |
|
|
Input logic |
Voltage input (PNP) – input impedance: ≤ 10.8 kΩ, [H]: 5 – 30 VDCᜡ, [L]: 0 – 2 VDCᜡ No-voltage input (NPN) – s hort-circuit impedance: ≤ 470 Ω, short-circuit residual voltage: ≤ 1 VDCᜡ open-circuit impedance: ≥ 100 kΩ |
|
|
One-shot output time |
0.05 to 5 sec |
|
|
Error |
Repeat / SET / voltage / Temp.: ≤ ± 0.01% ± 0.05 s |
|
|
Contact control output |
Relay |
- |
|
Type |
Instantaneous SPDT (1c) × 1 |
- |
|
Capacity |
250 VACᜠ 3 A, 30 VDCᜡ 3 A resistive load |
- |
|
Solid-state control output |
NPN open collector × 1 |
- |
|
Capacity |
≤ 30 VDCᜡ, 100 mA |
- |
|
Unit weight (packaged) |
≈ 110 g (≈ 171 g) |
≈ 95 g (≈ 156 g) |
|
Approval |
|
|
|
Voltage type |
AC voltage |
AC / DC voltage |
|
Power supply |
100 – 240 VACᜠ ± 10% 50 / 60 Hz |
24 VACᜠ ± 10% 50 / 60 Hz, 24 – 48 VDCt ± 10% |
|
Power consumption (Брояч FX4S-1P□) |
≤ 4.6 VA |
AC: ≤ 3.5 VA DC: ≤ 2.3 W |
|
Power consumption (Брояч FX5S-I□) |
≤ 3.8 VA |
AC: ≤ 3 VA DC: ≤ 1.8 W |
|
External supply power |
≤ 12 VDCᜡ ± 10% 50 mA |
|
|
Memory retention |
≈ 10 years (non-volatile semiconductor memory type) |
|
|
Insulation resistance |
≥ 100 MΩ (500 VDCᜡ megger) |
|
|
Dielectric strength |
Between all terminals and case: 2,000 VACᜠ 50 / 60 Hz for 1 minute |
|
|
Noise immunity |
± 2 kV square wave noise (pulse width: 1 ㎲) by the noise simulator |
± 500 V square wave noise (pulse width: 1 ㎲) by the noise simulator |
|
Vibration |
0.75 mm double amplitude at frequency of 10 to 55 Hz (for 1 minute) in each X, Y, Z direction for 1 hour |
|
|
Vibration (malfunction) |
0.5 mm double amplitude at frequency of 10 to 55 Hz (for 1 minute) in each X, Y, Z direction for 10 min |
|
|
Shock |
300 m/s2 (≈ 30 G) in each X, Y, Z direction for 3 times |
|
|
Shock (malfunction) |
100 m/s2 (≈ 10 G) in each X, Y, Z direction for 3 times |
|
|
Relay life cycle |
Mechanical: ≥ 5,000,000 operations Electrical: ≥ 100,000 operations (250 VACᜠ 3 A resistive load) |
|
|
Ambient temperature |
- 10 to 55 ℃, storage: - 25 to 65 ℃ (no freezing or condensation) |
|
|
Ambient humidity |
35 to 85% RH, storage: 35 to 85% RH (no freezing or condensation) |
|
|
Protection rating |
IP20 (front part, IEC standard) |
|
|
Model |
Брояч FX4□-□4 |
Брояч FX6M-□4 |
Брояч FX8M-□4 |
|
Display digits |
4-digit |
6-digit |
8-digit |
|
Character size |
W 6 × H 10 mm |
W 4 × H 8 mm |
W 3.8 × H 7.6 mm |
|
Max. counting speed |
1 / 30 / 2 k / 5 k cps | ||
|
Return time |
≤ 500 ms | ||
|
Min. signal width |
INHIBIT, RESET: ≈ 20 ms | ||
|
Input logic |
Voltage input (PNP) – input impedance: ≤ 10.8 kΩ, [H]: 5 – 30 VDCᜡ, [L]: 0 – 2 VDCᜡ No-voltage input (NPN) – s hort-circuit impedance: ≤ 470 Ω, short-circuit residual voltage: ≤ 1 VDCᜡ, open-circuit impedance: ≥ 100 kΩ |
||
|
One-shot output time |
Dependent on the output |
||
|
1-stage setting |
0.05 to 5 sec |
||
|
2-stage setting |
OUT1: 0.5 sec fixed, OUT2: 0.05 to 5 sec |
||
|
Error |
Repeat / SET / voltage / Temp.: ≤ ± 0.01% ± 0.05 s |
||
|
Contact control output |
Relay |
||
|
Type (1-stage) |
Instantaneous SPDT (1c) × 1 |
||
|
Type (2-stage) |
Instantaneous SPDT (1c) × 2 |
||
|
Capacity |
250 VACᜠ 3 A, 30 VDCᜡ 3 A resistive load |
||
|
Solid-state control output |
NPN open collector |
||
|
Type (1-stage) |
× 1 |
||
|
Type (2-stage) |
× 2 |
||
|
Capacity |
≤ 30 VDCᜡ, 100 mA, residual voltage: ≤ 1 VDCᜡ |
||
|
Unit weight (packaged) |
1-stage setting: ≈ 180 g (≈ 245 g), 2-stage setting: ≈ 200 g (≈ 265 g), Indicator: ≈ 160 g(≈ 225 g) |
||
|
Approval |
|
||
|
Power supply |
100 - 240 VACᜠ ± 10 % 50 / 60 Hz |
|
Power consumption |
Dependent on the output |
|
1-stage setting |
≤ 4.6 VA |
|
2-stage setting |
≤ 5.8 VA |
|
Indicator |
≤ 3.8 VA |
|
External supply power |
≤ 12 VDCᜡ ± 10% 50 mA |
|
Memory retention |
≈ 10 years (non-volatile semiconductor memory type) |
|
Insulation resistance |
≥ 100 MΩ (500 VDCᜡ megger) |
|
Dielectric strength |
Between all terminals and case: 2,000 VACᜠ 50 / 60 Hz for 1 min |
|
Noise immunity |
± 2 kV square wave noise (pulse width: 1 ㎲) by the noise simulator |
|
Vibration |
0.75 mm double amplitude at frequency of 10 to 55 Hz (for 1 minute) in each X, Y, Z direction for 1 hour |
|
Vibration (malfunction) |
0.5 mm double amplitude at frequency of 10 to 55 Hz (for 1 minute) in each X, Y, Z direction for 10 minute |
|
Shock |
300 m/s2 (≈ 30 G) in each X, Y, Z direction for 3 times |
|
Shock (malfunction) |
100 m/s2 (≈ 10 G) in each X, Y, Z direction for 3 times |
|
Relay life cycle |
Mechanical: ≥ 10,000,000 operations Electrical: ≥ 100,000 operations (250 VACᜠ 3 A resistive load) |
|
Ambient temperature |
- 10 to 55 ℃, storage: - 25 to 65 ℃ (no freezing or condensation) |
|
Ambient humidity |
35 to 85% RH, storage: 35 to 85% RH (no freezing or condensation) |
|
Protection rating |
IP20 (front part, IEC standard) |
|
Model |
Брояч FX4Y-I□ |
Брояч FX6Y-I□ |
|
Display digits |
4-digit |
6-digit |
|
Character size |
W 8 × H 14 mm |
W 4 × H 8 mm |
|
Max. counting speed |
1 / 30 / 2 k / 5 k cps |
|
|
Return time |
≤ 500 ms |
|
|
Min. signal width |
INHIBIT, RESET: ≈ 20 ms |
|
|
Input logic |
Voltage input (PNP) – input impedance: ≤ 10.8 kΩ, [H]: 5 – 30 VDCᜡ, [L]: 0 – 2 VDCᜡ No-voltage input (NPN) – s hort-circuit impedance: ≤ 470 Ω, short-circuit residual voltage: ≤ 1 VDCᜡ open-circuit impedance: ≥ 100 kΩ |
|
|
Error |
Repeat / SET / voltage / Temp.: ≤ ± 0.01% ± 0.05 s |
|
|
Unit weight (packaged) |
≈ 120 g (≈ 175 g) |
|
|
Approval |
|
|
|
Voltage type |
AC voltage |
AC / DC voltage |
|
Power supply |
100 – 240 VACᜠ ± 10% 50 / 60 Hz |
24 VACᜠ ± 10% 50 / 60 Hz, 24 – 48 VDCᜡ ± 10% |
|
Power consumption |
≤ 3.8 VA |
AC: ≤ 2.8 VA DC: ≤ 1.8 W |
|
External supply power |
≤ 12 VDCᜡ ± 10% 50 mA |
|
|
Memory retention |
≈ 10 years (non-volatile semiconductor memory type) |
|
|
Insulation resistance |
≥ 100 MΩ (500 VDCᜡ megger) |
|
|
Dielectric strength |
Between all terminals and case: 2,000 VACᜠ 50 / 60 Hz for 1 min |
|
|
Noise immunity |
± 2 kV square wave noise (pulse width: 1 ㎲) by the noise simulator |
± 500 V square wave noise (pulse width: 1 ㎲) by the noise simulator |
|
Vibration |
0.75 mm double amplitude at frequency of 10 to 55 Hz (for 1 minute) in each X, Y, Z direction for 1 hour |
|
|
Vibration (malfunction) |
0.5 mm double amplitude at frequency of 10 to 55 Hz (for 1 minute) in each X, Y, Z direction for 10 minute |
|
|
Shock |
300 m/s2 (≈ 30 G) in each X, Y, Z direction for 3 times |
|
|
Shock (malfunction) |
100 m/s2 (≈ 10 G) in each X, Y, Z direction for 3 times |
|
|
Ambient temperature |
- 10 to 55 ℃, storage: - 25 to 65 ℃ (no freezing or condensation) |
|
|
Ambient humidity |
35 to 85% RH, storage: 35 to 85% RH (no freezing or condensation) |
|
|
Protection rating |
IP40 (front part, IEC standard) |
|
|
Model |
Брояч LA8N-BN |
Брояч LA8N-BN-L |
Брояч LA8N-BV |
Брояч LA8N-BV-L |
Брояч LA8N-BF |
|
Display digits |
8-digit |
|
|||
|
Display method |
LCD Zero Blanking (character size: W 3.4 × H 8.7 mm) |
|
|||
|
Max. counting speed |
1 cps, 30 cps, 1 kcps |
20 cps |
|||
|
Operation method |
Count up, count down, count up/down |
Count up |
Count up, count down, count up/down |
Count up |
Count up |
|
Counting range |
-9999999 to 99999999 |
0 to 99999999 |
- 9999999 to 99999999 |
0 to 99999999 |
0 to 99999999 |
|
Input method |
No-voltage input |
Voltage input |
Free voltage input |
||
|
Counting input (H) |
Short Residual voltage: ≤ 0.5 VDCᜡ Max. impedance: ≤ 10 kΩ |
4.5 – 30 VDCᜡ |
24 – 240 VACᜠ / 6 – 240 VDCᜡ |
||
|
Counting input (L) |
Open Min. impedance: ≥ 750 kΩ |
0 – 2 VDCᜡ |
0 – 2 VACᜠ / 0 – 2.4 VDCᜡ |
||
|
RESET input |
No-voltage input |
Voltage input |
No-voltage input |
||
|
Min. signal width (UP, DOWN) |
≈ 20 ms |
- |
≈ 20 ms |
- |
- |
|
Min. signal width (RESET) |
≈ 20 ms |
|
|||
|
Unit weight (packaged) |
≈ 50 g (≈ 96 g) |
|
|||
|
Approval |
|
|
|||
|
Power supply |
Built-in battery (CR2477) |
|
Battery life cycle |
≳ 7 years (at ≈ 20 ℃) |
|
Backlight power |
24 VDCᜡ ± 10% |
|
Insulation resistance |
≥ 100 MΩ (500 VDCᜡ megger) |
|
Dielectric strength 01) |
2,000 VACᜠ 60 Hz for 1 min |
|
Vibration |
0.75 mm double amplitude at frequency of 10 to 55 Hz (for 1 minute) in each X, Y, Z direction for 1 hour |
|
Vibration (malfunction) |
0.3 mm double amplitude at frequency of 10 to 55 Hz (for 1 minute) in each X, Y, Z direction for 10 minute |
|
Shock |
300 m/s2 (≈ 30 G) in each X, Y, Z direction for 3 times |
|
Shock (malfunction) |
100 m/s2 (≈ 10 G) in each X, Y, Z direction for 3 times |
|
Ambient temp. |
- 10 to 55 ℃, storage: - 25 to 65 ℃ (no freezing or condensation) |
|
Ambient humi. |
35 to 85% RH, storage: 35 to 85% RH (no freezing or condensation) |
|
Protection rating |
IP66 (front part, when using the rubber waterproof ring, IEC standard) |
|
01) No-voltage input, voltage input: between all terminals and case |
|
|
Model |
Брояч FS4-1P□ |
Брояч FS5-I4 |
|
Display digits |
4-digit |
5-digit |
|
Character size |
W 3.8 × H 7.6 mm |
W 4 × H 8 mm |
|
Max. counting speed |
1 / 30 / 2 k / 5 k cps |
|
|
Return time |
≤ 500 ms |
|
|
Min. signal width |
RESET: ≈ 20 ms |
|
|
Input logic |
Voltage input (PNP) – input impedance: ≤ 10.8 kΩ, [H]: 5 – 30 VDCᜡ, [L]: 0 – 2 VDCᜡ No-voltage input (NPN) – s hort-circuit impedance: ≤ 470 Ω, short-circuit residual voltage: ≤ 1 VDCᜡ open-circuit impedance: ≥ 100 kΩ |
|
|
One-shot output time |
0.05 to 5 sec |
|
|
Contact control output |
Relay |
- |
|
Type |
Instantaneous SPST (1a) × 1 |
- |
|
Capacity |
250 VACᜠ 3 A, 30 VDCᜡ 3 A resistive load |
- |
|
Unit weight (packaged) |
≈ 90 g (≈ 130 g) |
≈ 80 g (≈ 120 g) |
|
Approval |
|
|
|
Voltage type |
AC voltage |
AC / DC voltage |
|
Power supply |
100 – 240 VACᜠ ± 10% 50 / 60 Hz |
24 VACᜠ ± 10 % 50 / 60 Hz, 24 – 48 VDCᜡ ± 10% |
|
Power consumption (Брояч FS4-1P□) |
≤ 4.6 VA |
AC: ≤ 3.5 VA DC: ≤ 2.3 W |
|
Power consumption (Брояч FS5-I4) |
≤ 3.8 VA |
- |
|
External supply power |
≤ 12 VDCᜡ ± 10 % 50 mA |
|
|
Memory retention |
≈ 10 years (non-volatile semiconductor memory type) |
|
|
Insulation resistance |
≥ 100 MΩ (500 VDCᜡ megger) |
|
|
Dielectric strength |
Between all terminals and case: 2,000 VACᜠ 50 / 60 Hz for 1 minute |
|
|
Noise immunity |
± 2 kV square wave noise (pulse width: 1 ㎲) by the noise simulator |
± 500 V square wave noise (pulse width: 1 ㎲) by the noise simulator |
|
Vibration |
0.75 mm double amplitude at frequency of 10 to 55 Hz (for 1 minute) in each X, Y, Z direction for 1 hour |
|
|
Vibration (malfunction) |
0.5 mm double amplitude at frequency of 10 to 55 Hz (for 1 minute) in each X, Y, Z direction for 10 min |
|
|
Shock |
300 m/s2 (≈ 30 G) in each X, Y, Z direction for 3 times |
|
|
Shock (malfunction) |
100 m/s2 (≈ 10 G) in each X, Y, Z direction for 3 times |
|
|
Relay life cycle |
Mechanical: ≥ 5,000,000 operations Electrical: ≥ 100,000 operations (250 VACᜠ 3 A resistive load) |
|
|
Ambient temperature |
- 10 to 55 ℃, storage: - 25 to 65 ℃ (no freezing or condensation) |
|
|
Ambient humidity |
35 to 85% RH, storage: 35 to 85% RH (no freezing or condensation) |
|
|
Protection rating |
IP20 (front part, IEC standard) |
|
|
Model |
Брояч FM4M-□4 |
Брояч FM6M-□4 |
|
Display digits |
4-digit |
6-digit |
|
Character size |
W 6 × H 10 mm |
W 4 × H 8 mm |
|
Max. counting speed
Return time
Min. signal width
Input logic |
1 / 30 / 300 / 2 k / 5 k cps |
|
| ≤ 500 ms | ||
| RESET: ≈ 20 ms | ||
|
Voltage input (PNP) – input impedance: ≤ 10.8 kΩ, [H]: 5 – 30 VDCᜡ, [L]: 0 – 2 VDCᜡ No-voltage input (NPN) – s hort-circuit impedance: ≤ 470 Ω, short-circuit residual voltage: ≤ 1 VDCᜡ open-circuit impedance: ≥ 100 kΩ |
||
|
One-shot output time |
0.01 to 99.99 s |
|
|
Contact control output |
Relay |
|
|
Type (1-stage) |
Instantaneous SPDT (1c) × 1 |
|
|
Type (2-stage) |
Instantaneous SPST (1a) × 2 |
|
|
Capacity |
250 VACᜠ 3 A, 30 VDCᜡ 3 A resistive load |
|
|
Solid-state control output |
NPN open collector |
|
|
Type (1-stage) |
× 1 |
|
|
Type (2-stage) |
× 2 |
|
|
Capacity |
≤ 30 VDCᜡ, 100 mA, residual voltage: ≤ 1 VDCᜡ |
|
|
Unit weight (packaged) |
1-stage setting: ≈ 180 g (≈ 245 g) 2-stage setting: ≈ 200 g (≈ 265 g) Indicator: ≈ 160 g (≈ 225 g) |
|
|
Approval |
|
|
|
Power supply |
100 - 240 VACᜠ ± 10 % 50 / 60 Hz |
|
Power consumption |
Dependent on the output |
|
1-stage setting |
≤ 4.6 VA |
|
2-stage setting |
≤ 5.8 VA |
|
Indicator |
≤ 3.8 VA |
|
External supply power |
≤ 12 VDCᜡ ± 10% 50 mA |
|
Memory retention |
≈ 10 years (non-volatile semiconductor memory type) |
|
Insulation resistance |
≥ 100 MΩ (500 VDCᜡ megger) |
|
Dielectric strength |
Between all terminals and case: 2,000 VACᜠ 50 / 60 Hz for 1 min |
|
Noise immunity |
± 2 kV square wave noise (pulse width: 1 ㎲) by the noise simulator |
|
Vibration |
0.75 mm double amplitude at frequency of 10 to 55 Hz (for 1 minute) in each X, Y, Z direction for 1 hour |
|
Vibration (malfunction) |
0.5 mm double amplitude at frequency of 10 to 55 Hz (for 1 minute) in each X, Y, Z direction for 10 minute |
|
Shock |
300 m/s2 (≈ 30 G) in each X, Y, Z direction for 3 times |
|
Shock (malfunction) |
100 m/s2 (≈ 10 G) in each X, Y, Z direction for 3 times |
|
Relay life cycle |
Mechanical: ≥ 5,000,000 operations Electrical: ≥ 100,000 operations (250 VACᜠ 3 A resistive load) |
|
Ambient temperature |
- 10 to 55 ℃, storage: - 25 to 65 ℃ (no freezing or condensation) |
|
Ambient humidity |
35 to 85% RH, storage: 35 to 85% RH (no freezing or condensation) |
|
Protection rating |
IP20 (front part, IEC standard) |
|
Model |
Таймер ATM4-2□□ |
Таймер ATM4-5□□ |
Таймер ATM4-6□□ |
|
Function |
Power ON Delay |
|
|
|
Return time |
≤ 100 ms |
|
|
|
Time operation |
Power ON Start |
|
|
|
Control output |
Relay |
|
|
|
Contact type |
4PDT (4c) |
|
|
|
Contact capacity |
250 VACᜠ 3 A, 24 VDCᜡ 3 A resistive load |
|
|
|
Error |
Repeat: ≤ ± 0.5% ± 10 ms SET: ≤ ± 10% ± 50 ms Voltage: ≤ ± 0.5% ± 10 ms Temp.: ≤ ± 2% ± 10 ms |
|
|
|
Approval |
|
||
|
Unit weight (packaged) |
≈ 42 g (≈ 48 g) |
|
|
|
Power supply |
24 VDCᜡ |
220 VACᜠ 50 / 60 Hz |
110 VACᜠ 50 / 60 Hz |
|
Allowable voltage range |
21.6 – 26.4 VDCᜡ |
200 – 230 VACᜠ 50 / 60 Hz |
100 – 120 VACᜠ 50 / 60 Hz |
|
Power consumption |
≈ 1.2 W |
≈ 3 VA |
≈ 3 VA |
|
Insulation resistive |
≥ 100 MΩ (500 VDCᜡ megger) |
||
|
Dielectric strength |
3,000 VACᜠ at 50 / 60 Hz for 1 min |
||
|
Noise immunity |
± 2 kV square-wave noise by noise simulator (pulse width 1 ㎲) |
||
|
Vibration |
0.75 mm double amplitude at frequency of 10 to 55 Hz (for 1 min) in each X, Y, Z direction for 1 hour |
||
|
Vibration (malfunction) |
0.5 mm double amplitude at frequency of 10 to 55 Hz (for 1 min) in each X, Y, Z direction for 10 min |
||
|
Shock |
300 m/s2 (≈ 30 G) in each X, Y, Z direction for 3 times |
||
|
Shock (malfunction) |
100 m/s2 (≈ 10 G) In each X, Y, Z direction for 3 times |
||
|
Relay life cycle |
Mechanical: ≥ 10,000,000 operations Electrical: ≥ 200,000 operations |
||
|
Ambient temperature |
- 10 to 50 ℃, storage: - 25 to 65 ℃ (no freezing or condensation) |
||
|
Ambient humidity |
35 to 85% RH, storage: 35 to 85% RH (no freezing or condensation) |
||
|
Model |
Таймер ATS8-□□□ |
Таймер ATS11-□□D |
Таймер ATS11-□□E |
|
Function |
Multi Function Timer |
|
|
|
Return time |
≤ 100 ms |
|
|
|
Time operation |
Power ON Start |
Signal ON Start |
|
|
Input |
- |
START, INHIBIT, RESET |
|
|
Min. signal width |
- |
≈ 50ms |
|
|
No-voltage input |
- |
Short-circuit impedance: ≤ 1 kΩ Short-circuit residual voltage: ≤ 0.5 VDCᜡ Open-circuit impedance: ≥ 100 kΩ |
|
|
Control output |
Relay |
|
|
|
Contact type |
Time limit DPDT (2c), Instantaneous SPDT (1c) + Time limit SPDT (1c) |
Time limit DPDT (2c) |
Instantaneous SPDT (1c) + Time limit SPDT (1c) |
|
Contact capacity |
250 VACᜠ 3 A, 30 VDCᜡ 3 A resistive load |
250 VACᜠ 3 A, 24 VDCᜡ 3 A resistive load |
|
|
Error |
Repeat: ≤ ± 0.2% ± 10 ms |
||
|
Approval |
|
||
|
Unit weight (packaged) |
≈ 70 g (≈ 95 g) |
||
|
Power supply |
12 VDCᜡ ±10% |
24 VACᜠ ±10% 50 / 60 Hz, 24 VDCᜡ ±10% |
100 - 240 VACᜠ ±10% 50 / 60 Hz, 24 - 240 VDCᜡ ±10% |
|
Power consumption |
It depends on the plug type and output. |
||
|
Брояч ATS8-□□□ |
DC: ≤ 1.5 W |
AC: ≤ 4.5 VA DC: ≤ 2 W |
AC: ≤ 4.2 VA DC: ≤ 2 W |
|
Брояч ATS11-□□D |
DC: ≤ 1 W |
AC: ≤ 4 VA DC: ≤ 1.5 W |
AC: ≤ 3.5 VA DC: ≤ 2 W |
|
Брояч ATS11-□□E |
DC: ≤ 1.5 W |
AC: ≤ 4.5 VA DC: ≤ 2 W |
AC: ≤ 4.2 VA DC: ≤ 2 W |
|
Insulation resistive |
≥ 100 MΩ (500 VDCᜡ megger) |
||
|
Dielectric strength |
2,000 VACᜠ at 50 / 60 Hz for 1 min |
||
|
Noise immunity |
It depends on the power supply. |
||
|
Брояч ATS□-1□□ |
± 500 V square-wave noise by noise simulator (pulse width 1 ㎲) |
||
|
Брояч ATS□-2□□ |
|||
|
Брояч ATS□-4□□ |
± 2 kV square-wave noise by noise simulator (pulse width 1 ㎲) |
||
|
Vibration |
0.75 mm double amplitude at frequency of 10 to 55 Hz (for 1 min) in each X, Y, Z direction for 1 hour |
||
|
Vibration (malfunction) |
0.5 mm double amplitude at frequency of 10 to 55 Hz (for 1 min) in each X, Y, Z direction for 10 min |
||
|
Shock |
300 m/s2 (≈ 30 G) in each X, Y, Z direction for 3 times |
||
|
Shock (malfunction) |
100 m/s2 (≈ 10 G) In each X, Y, Z direction for 3 times |
||
|
Relay life cycle |
Mechanical: ≥ 10,000,000 operations Electrical:≥ 100,000 operations (250 VACᜠ 3 A resistive load) |
||
|
Ambient temperature |
- 10 to 55 ℃, storage: - 25 to 65 ℃ (no freezing or condensation) |
||
|
Ambient humidity |
35 to 85% RH, storage: 35 to 85% RH (no freezing or condensation) |
||
|
Model |
Таймер ATS□W-1□ |
Таймер ATS□W-2□ |
Таймер ATS□W-4□ |
|
Function |
ON / OFF Flicker operation |
|
|
|
Return time |
≤ 100 ms |
|
|
|
Time operation |
Power ON Start |
|
|
|
Control output |
Relay |
|
|
|
Contact type |
Time limit DPDT (2c), Instantaneous SPDT (1c) + Time limit SPDT (1c) |
|
|
|
Contact capacity |
250 VACᜠ 3 A, 30 VDCᜡ 3 A resistive load |
|
|
|
Error |
Repeat: ≤ ± 0.2% ± 10 ms SET: ≤ ± 5% ± 50 ms Voltage: ≤ ± 0.5% Temp.: ≤ ± 2% |
|
|
|
Approval |
|
|
|
|
Unit weight (packaged) |
≈ 75 g (≈ 100 g) |
|
|
|
Power supply |
12 VDCᜡ |
24 VACᜠ ± 10% 50 / 60 Hz, 24 VDCᜡ ± 10% |
100 - 240 VACᜠ ± 10% 50 / 60 Hz, 24 - 240 VDCᜡ ± 10% |
|
Power consumption |
DC: ≤ 1.5 W |
AC: ≤ 4.5 VA DC: ≤ 2 W |
AC: ≤ 4.2 VA DC: ≤ 2 W |
|
Insulation resistive |
≥ 100 MΩ (500 VDCᜡ megger) |
||
|
Dielectric strength |
2,000 VACᜠ at 50/60 Hz for 1 min |
||
|
Noise immunity |
± 500 V square-wave noise by noise simulator (pulse width 1 ㎲) |
± 2kV square-wave noise by noise simulator (pulse width 1 ㎲) |
|
|
Vibration |
0.75 mm double amplitude at frequency of 10 to 55 Hz (for 1 min) in each X, Y, Z direction for 1 hour |
||
|
Vibration (malfunction) |
0.5 mm double amplitude at frequency of 10 to 55 Hz (for 1 min) in each X, Y, Z direction for 10 min |
||
|
Shock |
300 m/s2 (≈ 30 G) in each X, Y, Z direction for 3 times |
||
|
Shock (malfunction) |
100 m/s2 (≈ 10 G) In each X, Y, Z direction for 3 times |
||
|
Relay life cycle |
Mechanical: ≥ 10,000,000 operations Electrical: ≥ 100,000 operations (250 VACᜠ 3 A resistive load) |
||
|
Ambient temperature |
- 10 to 55 ℃, storage: - 25 to 65 ℃ (no freezing or condensation) |
||
|
Ambient humidity |
35 to 85% RH, storage: 35 to 85% RH (no freezing or condensation) |
||
|
Model |
Таймер ATS8P-2□ |
Таймер ATS8P-5□ |
Таймер ATS8P-6□ |
|
Function |
Power OFF Delay |
|
|
|
Return time |
≤ 100 ms |
|
|
|
Control output |
Relay |
|
|
|
Contact type |
Time limit DPDT (2c) |
|
|
|
Contact capacity
Error
Time operation |
250 VACᜠ 3 A, 30 VDCᜡ 3 A resistive load |
|
|
| Repeat: ≤ ± 0.2% ± 10 ms SET: ≤ ± 5% ± 50 ms Voltage: ≤ ± 0.5% Temp.: ≤ ± 2% |
|
||
|
Power OFF Start |
|
||
|
Approval |
|
|
|
|
Unit weight |
SEC unit model: ≈ 80 g, MIN unit model: ≈ 85 g |
|
|
|
Power supply |
24 VACᜠ ± 10% 50 / 60 Hz, 24 VDCᜡ ± 10% |
200 - 240 VACᜠ ± 10%, 50 / 60 Hz |
100 - 120 VACᜠ ± 10%, 50 / 60 Hz |
|
Power consumption |
AC: ≤ 0.2 VA DC: ≤ 0.2 W |
AC: ≤ 1.5 VA |
AC: ≤ 1.5 VA |
|
Insulation resistive |
100 MΩ (500 VDCᜡ megger) |
||
|
Dielectric strength |
2,000 VACᜠ at 50/60 Hz for 1 min |
||
|
Noise immunity |
± 2 kV square-wave noise by noise simulator (pulse width 1 ㎲) |
||
|
Vibration |
0.75 mm double amplitude at frequency of 10 to 55 Hz (for 1 min) in each X, Y, Z direction for 1 hour |
||
|
Vibration (malfunction) |
0.5 mm double amplitude at frequency of 10 to 55 Hz (for 1 min) in each X, Y, Z direction for 10 min |
||
|
Shock |
300 m/s2 (≈ 30 G) in each X, Y, Z direction for 3 times |
||
|
Shock (malfunction) |
100 m/s2 (≈ 10 G) In each X, Y, Z direction for 3 times |
||
|
Relay life cycle |
Mechanical: ≥ 10,000,000 operations Electrical: ≥ 100,000 operations (250 VACᜠ 3 A resistive load) |
||
|
Ambient temperature |
- 10 to 55 ℃, storage: - 25 to 65 ℃ (no freezing or condensation) |
||
|
Ambient humidity |
35 to 85% RH, storage: 35 to 85% RH (no freezing or condensation) |
||
|
Model |
Таймер ATS8SD-4 |
|
Function |
Star-Delta Timer |
|
Return time |
≤ 100 ms |
|
Time operation |
Power ON Start |
|
Control output |
Relay |
|
Contact type |
Y Contact: Time limit SPST (1a), ∆Contact: Time limit SPST (1a) |
|
Contact capacity |
250 VACᜠ 3 A, 30 VDCc 3 A resistive load |
|
Error |
Repeat: ≤ ± 0.2% ± 10 ms Voltage: ≤ ± 0.5% Temp.: ≤ ± 2% Y setting time : ≤ ± 5% ± 50 ms Y -∆switching time: ≤ ± 25% |
|
Approval |
|
|
Unit weight |
≈ 72 g |
|
Power supply |
100 - 240 VACᜠ ± 10% 50 / 60 Hz, 24 - 240 VDCᜡ ± 10% |
|
Power consumption |
AC: ≤ 3 VA, DC: ≤ 1.5 W |
|
Insulation resistive |
≥ 100 MΩ (500 VDCᜡ megger) |
|
Dielectric strength |
2,000 VACᜠ at 50 / 60 Hz for 1 min |
|
Noise immunity |
± 2 kV square-wave noise by noise simulator (pulse width 1 ㎲) |
|
Vibration |
0.75 mm double amplitude at frequency of 10 to 55 Hz (for 1 min) in each X, Y, Z direction for 1 hour |
|
Vibration (malfunction) |
0.5 mm double amplitude at frequency of 10 to 55 Hz (for 1 min) in each X, Y, Z direction for 10 min |
|
Shock |
300 m/s2 (≈ 30 G) in each X, Y, Z direction for 3 times |
|
Shock (malfunction) |
100 m/s2 (≈ 10 G) In each X, Y, Z direction for 3 times |
|
Relay life cycle |
Mechanical: ≥ 10,000,000 operations Electrical: ≥ 100,000 operations (250 VACᜠ 3 A resistive load) |
|
Ambient temperature |
- 10 to 55 ℃, storage: - 25 to 65 ℃ (no freezing or condensation) |
|
Ambient humidity |
35 to 85% RH, storage: 35 to 85% RH (no freezing or condensation) |
|
Model |
Таймер AT8N-□ |
Таймер AT11DN-□ |
Таймер AT11EN-□ |
|
Function |
Multi Function Timer |
|
|
|
Return time |
≤ 100 ms |
|
|
|
Time operation |
Power ON Start |
Signal ON Start |
|
|
Input |
- |
INHIBIT, START, RESET |
|
|
Min. signal width |
- |
≈ 50 ms |
|
|
No-voltage input |
- |
Short-circuit impedance: ≤ 1 kΩ Short-circuit residual voltage: ≤ 0.5 VDCᜡ Open-circuit impedance: ≥ 100 kΩ |
|
|
Control output |
Relay |
|
|
|
Contact type |
Time limit DPDT (2c), Time limit SPDT (1c) + Instantaneous SPDT (1c) |
Time limit DPDT (2c) |
Time limit SPDT (1c) + Instantaneous SPDT (1c) |
|
Contact capacity
Error
Approval |
250 VACᜠ 5 A, 30 VDCᜡ 5 Aresistive load |
250 VACᜠ 5 A, 24 VDCᜡ 5 A resistive load |
250 VACᜠ 5 A, 30 VDCᜡ 5 A resistive load |
| Repeat: ≤ ± 0.2% ± 10 ms SET: ≤ ± 5% ± 50 ms Voltage: ≤ ± 0.5% Temp.: ≤ ± 2% |
|||
|
|
|||
|
Unit weight (packaging) |
≈ 86.71 g (≈ 134.12 g) |
≈ 85 g (≈ 132.2 g) |
≈ 87.5 g (≈ 134.7 g) |
|
Power supply |
100 - 240 VACᜠ ± 10% 50 / 60 Hz, 24 - 240 VDCᜡ ± 10% |
12 VDCᜡ ± 10% |
24 VACᜠ ± 10% 50 / 60 Hz, 24 VDCᜡ ± 10% |
|
Power consumption |
It depends on the model. |
|
|
|
Таймер AT8N-□ |
AC: ≤ 4.3 VA DC: ≤ 2 W |
DC: ≤ 1.5 W |
AC: ≤ 4.5 VA DC: ≤ 2 W |
|
Таймер AT11DN-□ |
AC: ≤ 3.5 VA DC: ≤ 1.5 W |
DC: ≤ 1 W |
AC: ≤ 4 VA DC: ≤ 1.5 W |
|
Таймер AT11EN-□ |
AC: ≤ 4.3 VA DC: ≤ 2 W |
DC: ≤ 1.5 W |
AC: ≤ 4.5 VA DC: ≤ 2 W |
|
Insulation resistive |
≥ 100 MΩ (500 VDCᜡ megger) |
||
|
Dielectric strength |
2,000 VACᜠ 50 / 60 Hz for 1 min |
||
|
Noise immunity |
± 2 kV square-wave noise by noise simulator (pulse width 1 ㎲) |
± 500 V square-wave noise by noise simulator (pulse width 1 ㎲) |
|
|
Vibration |
0.75 mm double amplitude at frequency of 10 to 55 Hz (for 1 min) in each X, Y, Z direction for 1 hour |
||
|
Vibration (malfunction) |
0.5 mm double amplitude at frequency of 10 to 55 Hz (for 1 min) in each X, Y, Z direction for 10 min |
||
|
Shock |
300 m/s2 (≈ 30 G) in each X, Y, Z direction for 3 times |
||
|
Shock (malfunction) |
100 m/s2 (≈ 30 G) In each X, Y, Z direction for 3 times |
||
|
Relay life cycle |
Mechanical: ≥ 10,000,000 operations Electrical: ≥ 100,000 operations (250 VACᜠ 5 A resistive load) |
||
|
Ambient temperature |
- 10 to 55 ℃, storage: - 25 to 65 ℃ (no freezing or condensation) |
||
|
Ambient humidity |
35 to 85% RH, storage: 35 to 85% RH (no freezing or condensation) |
||
|
Model |
Таймер AT8P□ |
Таймер AT8P□-2 |
Таймер AT8P□-6 |
Таймер AT8P□-7 |
|
Function |
Power OFF Delay |
|
||
|
Time operation |
Power OFF Start |
|
||
|
Control output |
Relay |
|
||
|
Contact type |
Time limit DPDT (2c) |
|
||
|
Contact capacity |
250 VACᜠ 3 A, 30 VDCᜡ 3 A resistive load |
|
||
|
Error |
Repeat: ≤ ± 0.2% ± 10 ms SET: ≤ ± 5% ± 50 ms Voltage: ≤ ± 0.5% Temp.: ≤ ± 2% |
|
||
|
Approval |
|
|
||
|
Unit weight |
≈ 100 g |
|
||
|
Power supply |
200 - 240 VACᜠ ± 10%, 50 / 60 Hz |
24 VACᜠ ± 10% 50 / 60 Hz, 24 VDCᜡ ± 10% |
100 - 120 VACᜠ ± 10%, 50 / 60 Hz |
100 / 110 VDCᜡ ± 10% |
|
Power consumption |
AC: ≤ 1.5 VA |
AC: ≤ 0.2 VA DC: ≤ 0.2 W |
AC: ≤ 1.5 VA |
DC: ≤ 0.8 W |
|
Insulation resistive |
≥ 100 MΩ (500 VDCᜡ megger) |
|||
|
Dielectric strength |
2,000 VACᜠ at 50 / 60 Hz for 1 min |
|||
|
Noise immunity |
± 2 kV square-wave noise by noise simulator (pulse width 1 ㎲) |
|||
|
Vibration |
0.75 mm double amplitude at frequency of 10 to 55 Hz (for 1 min) in each X, Y, Z direction for 1 hour |
|||
|
Vibration (malfunction) |
0.5 mm double amplitude at frequency of 10 to 55 Hz (for 1 min) in each X, Y, Z direction for 10 min |
|||
|
Shock |
300 m/s2 (≈ 30 G) in each X, Y, Z direction for 3 times |
|||
|
Shock (malfunction) |
100 m/s2 (≈ 10 G) In each X, Y, Z direction for 3 times |
|||
|
Relay life cycle |
Mechanical: ≥ 10,000,000 operations Electrical: ≥ 100,000 operations (250 VACᜠ 3 A resistive load) |
|||
|
Ambient temperature |
- 10 to 55 ℃, storage: - 25 to 65 ℃ (no freezing or condensation) |
|||
|
Ambient humidity |
35 to 85% RH, storage: 35 to 85% RH (no freezing or condensation) |
|||
|
Model |
Таймер ATE8-4□ |
Таймер ATE8-4□D |
Таймер ATE8-4□E |
|
Function |
Power ON Delay |
|
|
|
Return time |
≤ 200 ms |
|
|
|
Time operation |
Power ON Start |
|
|
|
Control output |
Relay |
|
|
|
Contact type |
Time limit SPDT (1c) + Instantaneous SPST (1a) |
Time limit DPDT (2c) |
Time limit SPDT (1c) + Instantaneous SPDT (1c) |
|
Contact capacity
Error
Approval |
250 VACᜠ 3A, 30 VDCᜡ 3 A resistive load |
||
| Repeat: ≤ ± 0.3% ± 10 ms SET: ≤ ± 10% ± 50 ms Voltage: ≤ ± 0.5% ± 10 ms Temp.: ≤ ± 2% ± 10 ms |
|||
|
|
|||
|
Unit weight (packaged) |
≈ 75 g (≈ 122.2 g) | ||
|
Power supply |
100 - 240 VACᜠ ±10% 50 / 60 Hz, 24 - 240 VDCᜡ ±10% |
|
Power consumption |
AC: ≤ 3.5 VA, DC: ≤ 2 W |
|
Insulation resistive |
≥ 100 MΩ (500 VDCᜡ megger) |
|
Dielectric strength |
2,000 VACᜠ at 50 / 60 Hz for 1 min |
|
Noise immunity |
± 2 kV square-wave noise by noise simulator (pulse width 1 ㎲) |
|
Vibration |
0.75 mm double amplitude at frequency of 10 to 55 Hz (for 1 min) in each X, Y, Z direction for 1 hour |
|
Vibration (malfunction) |
0.5 mm double amplitude at frequency of 10 to 55 Hz (for 1 min) in each X, Y, Z direction for 10 min |
|
Shock |
300 m/s2 (≈ 30 G) in each X, Y, Z direction for 3 times |
|
Shock (malfunction) |
100 m/s2 (≈ 10 G) In each X, Y, Z direction for 3 times |
|
Relay life cycle |
Mechanical: ≥ 5,000,000 operations Electrical: ≥ 100,000 operations (250 VACᜠ 3 A resistive load) |
|
Ambient temperature |
- 10 to 55 ℃, storage: - 25 to 65 ℃ (no freezing or condensation) |
|
Ambient humidity |
35 to 85% RH, storage: 35 to 85% RH (no freezing or condensation) |
|
Protection rating |
IP40 (front part, IEC standard) |
|
Model |
Таймер AT8SDN |
|
Function |
Star-Delta Timer |
|
Return time |
≤ 100 ms |
|
Time operation |
Power ON Start |
|
Control output |
Relay |
|
Contact type |
Y Contact: Time limit SPST (1a), ∆Contact: Time limit SPST (1a) |
|
Contact capacity |
250 VACᜠ 5 A, 30 VDCᜡ 5 A resistive load |
|
Error |
Repeat: ≤ ± 0.2% ± 10 ms Voltage: ≤ ± 0.5% Temp.: ≤ ± 2% Y setting time : ≤ ± 5% ± 50 ms Y -∆switching time: ≤ ± 25% |
|
Approval |
|
|
Weight |
≈ 90 g |
|
Power supply |
100 - 240 VACᜠ ± 10% 50 / 60 Hz, 24 - 240 VDCᜡ ± 10% |
|
Power consumption |
AC: ≤ 3.2 VA, DC: ≤ 1.5 W |
|
Insulation resistive |
≥ 100 MΩ (500 VDCᜡ megger) |
|
Dielectric strength |
2,000 VACᜠ at 50 / 60 Hz for 1 min |
|
Noise immunity |
± 2 kV square-wave noise by noise simulator (pulse width 1 ㎲) |
|
Vibration |
0.75 mm double amplitude at frequency of 10 to 55 Hz (for 1 min) in each X, Y, Z direction for 1 hour |
|
Vibration (malfunction) |
0.5 mm double amplitude at frequency of 10 to 55 Hz (for 1 min) in each X, Y, Z direction for 10 min |
|
Shock |
300 m/s2 (≈ 30 G) in each X, Y, Z direction for 3 times |
|
Shock (malfunction) |
100 m/s2 (≈ 10 G) In each X, Y, Z direction for 3 times |
|
Relay life cycle |
Mechanical: ≥ 10,000,000 operations Electrical: ≥ 100,000 operations (250 VACᜠ 5 A resistive load) |
|
Ambient temperature |
- 10 to 55 ℃, storage: - 25 to 65 ℃ (no freezing or condensation) |
|
Ambient humidity |
35 to 85% RH, storage: 35 to 85% RH (no freezing or condensation) |
|
Model |
Таймер LE4S |
Таймер LE4SA |
|
|
Function |
MULTI time, MULTI operation |
|
|
|
Display method |
LCD (Backlight) |
|
|
|
Return time |
≤ 100 ms |
|
|
|
Time operation |
Signal ON Start |
Power ON Start |
|
|
Input signal |
START, INHIBIT, RESET |
|
|
|
Min. signal width |
≈ 1,20 ms |
- |
|
|
No-voltage input |
Short-circuit impedance: ≤ 1 kΩ Short-circuit residual voltage |
- |
|
|
Control output |
Relay |
|
|
|
Contact type |
Time limit SPDT (1c) |
Time limit DPDT (2c), Time limit SPDT (1c) + Instantaneous SPDT (1c) (depends on operation mode) |
|
|
Contact capacity |
250 VACᜠ 5 A, 30 VDCᜡ 5 A resistive load |
250 VACᜠ 3 A, 30 VDCᜡ 3 A resistive load |
|
|
Error |
Repeat |
Power ON Start : ≤ ± 0.01% ± 0.05 sec |
≤ ± 0.01% ± 0.05 sec |
|
SET |
|||
|
Temp. |
|||
|
Approval |
|
||
|
Unit weight |
≈ 98 g |
|
|
|
Model |
Таймер LE4S |
Таймер LE4SA |
|
Power supply |
24 – 240 VACᜠ ± 10% 50 / 60 Hz, 24 – 240 VDCᜡ ± 10% |
|
|
Power consumption |
AC: ≤ 4.5 VA, DC: ≤ 2 W |
AC: ≤ 4 VA, DC: ≤ 1.6 W |
|
Insulation resistive |
100 MΩ (500 VDCᜡ megger) |
|
|
Dielectric strength |
2000 VACᜠ 50 / 60 Hz for 1 min |
|
|
Noise immunity |
± 2 kV square-wave noise by noise simulator (pulse width 1 ㎲) |
|
|
Vibration |
0.75 mm double amplitude at frequency of 10 to 55 Hz (for 1 min) in each X, Y, Z direction for 1 hour |
|
|
Vibration (malfunction) |
0.5 mm double amplitude at frequency of 10 to 55 Hz (for 1 min) in each X, Y, Z direction for 10 min |
|
|
Shock |
300 m/s2 (≈ 30 G) in each X, Y, Z direction for 3 times |
|
|
Shock (malfunction) |
100 m/s2 (≈ 10 G) In each X, Y, Z direction for 3 times |
|
|
Relay life cycle |
Mechanical: ≥ 10,000,000 operations Electrical: ≥ 100,000 operations |
|
|
Ambient temperature |
- 10 to 55 ℃, storage: - 25 to 65 ℃ (no freezing or condensation) |
|
|
Ambient humidity |
35 to 85% RH, storage: 35 to 85% RH (no freezing or condensation) |
|
|
Model |
Таймер LE7M-2B |
Таймер LE7M-2D |
|
Number of steps for the program |
64 steps for weekly, 32 steps for yearly |
|
|
Operation mode |
Weekly: ON/OFF, pulse, cycle operation Yearly: ON/OFF, pulse operation |
|
|
Temperature error |
≤ (± 0.01% ± 0.05 sec), at a ratio by the setting time |
|
|
Cyclic error |
± 15 sec/month (25 ℃, ± 4 sec/1 week) |
|
|
Memory retention |
≥ 5 years (25 ℃) |
|
|
External input |
Open or short circuit by a contact device (switch or relay) |
|
|
Mounting type |
Flush mount |
Surface or DIN rail mount |
|
Approval |
|
|
|
Unit weight (packaged) |
≈ 207 g (≈ 337 g) |
≈ 208 g (≈ 361 g) |
|
Power supply |
100 - 240 VACᜠ ±10%, 50/60 Hz |
|
Power consumption |
≤ 4.2 VA |
|
Control output |
Relay |
|
Contact type |
SPDT (1c) |
|
Contact capacity |
Resistive load: 250 VACᜠ 15 A |
|
Number of circuits |
Independent 2 circuits (1c × 2) |
|
Mechanical life expectancy |
≥ 10,000,000 operations (switching capacity: 30 times/min) |
|
Electrical life expectancy |
≥ 50,000 operations (switching capacity: 20 times/min, resistive load: 250 VACᜠ 15 A) |
|
Insulation resistive |
≥ 100 MΩ (500 VDCᜡ megger) |
|
Noise immunity |
± 2 kV square-wave noise by noise simulator (pulse width 1 ㎲) |
|
Dielectric strength |
Between primary terminal and case: 3,000 VACᜠ at 50/60 Hz for 1 min |
|
Vibration |
0.75 mm double amplitude at frequency of 10 to 55 Hz (for 1 min) in each X, Y, Z direction for 2 hours |
|
Vibration (malfunction) |
0.5 mm double amplitude at frequency of 10 to 55 Hz (for 1 min) in each X, Y, Z direction for 10 min |
|
Shock |
300 m/s2 (≈ 30 G) in each X, Y, Z direction for 3 times |
|
Shock (malfunction) |
100 m/s2 (≈ 10 G) in each X, Y, Z direction for 3 times |
|
Ambient temperature |
- 10 to 55 ℃, storage: - 25 to 65 ℃ (no freezing or condensation) |
|
Ambient humidity |
35 to 85% RH, storage: 35 to 85% RH (no freezing or condensation) |
|
Model |
Таймер LE8N-BN |
Таймер LE8N-BN-L |
Таймер LE8N-BV |
Таймер LE8N-BV-L |
Таймер LE8N-BF |
|
Display digits |
8-digit |
||||
|
Display method |
LCD Zero Blanking (character size: W 3.4 × H 8.7 mm) |
||||
|
Operation method |
Count up |
||||
|
Time range |
0 to 99999999 |
||||
|
Error |
Time / Temp.: ± 0.01% |
||||
|
Input method |
No-voltage input |
Voltage input |
Free voltage input |
||
|
Counting input (H) |
Short Residual voltage: ≤ 0.5 VDCᜡ Max. impedance: ≤ 10 kΩ |
4.5 – 30 VDCᜡ |
24 – 240 VACᜠ / 6 – 240 VDCᜡ |
||
|
Counting input (L) |
Open Min. impedance: ≥ 750 kΩ |
0 – 2 VDCᜡ |
0 – 2 VACᜠ / 0 – 2.4 VDCᜡ |
||
|
RESET input |
No-voltage input |
Voltage input |
No-voltage input |
||
|
Min. signal width |
SIGNAL INPUT, RESET: ≳ 20 ms |
||||
|
Unit weight (packaged) |
≈ 50 g (≈ 96 g) |
||||
|
Approval |
|
||||
|
Power supply |
Built-in battery (CR2477) |
|
Battery life cycle |
≳ 10 years (at ≈ 20 ℃) |
|
Backlight power |
24 VDCᜡ ± 10% |
|
Insulation resistance |
≥ 100 MΩ (500 VDCᜡ megger) |
|
Dielectric strength 01) |
2,000 VACᜠ at 60 Hz for 1 min |
|
Vibration |
0.75 mm double amplitude at frequency of 10 to 55 Hz (for 1 min) in each X, Y, Z direction for 1 hour |
|
Vibration (malfunction) |
0.5 mm double amplitude at frequency of 10 to 55 Hz (for 1 min) in each X, Y, Z direction for 10 min |
|
Shock |
300 m/s2 (≈ 30 G) in each X, Y, Z direction for 3 times |
|
Shock (malfunction) |
100 m/s2 (≈ 10 G) in each X, Y, Z direction for 3 times |
|
Ambient temperature |
- 10 to 55 ℃, storage: - 25 to 65 ℃ (no freezing or condensation) |
|
Ambient humidity |
35 to 85% RH, storage: 35 to 85% RH (no freezing or condensation) |
|
Protection rating |
IP66 (front part, when using the rubber waterproof ring, IEC standard) |
|
Model |
Таймер FS4E-1P2 |
Таймер FS5E-1P4 |
Таймер FS5E-I4 |
|
Display digits |
4-digit |
5-digit |
|
|
Character size |
W 3.8 × H 7.6 mm |
W 4 × H 8 mm |
|
|
Return time |
≤ 500 ms |
||
|
Time operation |
Power ON Start |
||
|
Min. signal width |
RESET, INHIBIT: ≈ 20 ms |
||
|
Input logic |
Voltage input (PNP) – input impedance: ≤ 10.8 kΩ, [H]: 5 – 30 VDCᜡ, [L]: 0 – 2 VDCᜡ No-voltage input (NPN) – short-circuit impedance: ≤ 470 Ω, – short-circuit residual voltage: ≤ 1 VDCᜡ – open-circuit impedance: ≥ 100 kΩ |
||
|
One-shot output time |
0.05 to 5 sec |
||
|
Control output |
Relay |
- |
|
|
Contact type |
Time limit SPDT (1c) |
- |
|
|
Contact capacity |
250 VACᜠ 3 A, 30 VDCᜡ 3 A resistive load |
- |
|
|
Error |
Repeat / SET / Voltage / Temp.: ≤ ± 0.01% ± 0.05 sec |
||
|
Unit weight (packaged) |
≈ 90 g (≈ 130 g) |
≈ 80 g (≈ 120 g) |
|
|
Approval |
|
||
|
Voltage type |
AC voltage type |
AC / DC voltage type |
|
Power supply |
100 – 240 VACᜠ ± 10% 50 / 60 Hz |
24 VACᜠ ± 10% 50 / 60 Hz, 24 – 48 VDCᜡ ± 10% |
|
Power consumption (FS5E-1P4) |
≤ 4.6 VA |
- |
|
Power consumption (FS5E-I4) |
≤ 3.8 VA |
- |
|
Power consumption (FS4E-1P2) |
- |
AC: ≤ 3.5 VA DC: ≤ 2.3 W |
|
Memory retention |
≈ 10 years (non-volatile semiconductor memory type) |
|
|
Insulation resistance |
≥ 100 MΩ (500 VDCᜡ megger) |
|
|
Dielectric strength |
2,000 VACᜠ 50 / 60 Hz for 1 min (between all terminals and case) |
|
|
Noise immunity |
± 2 kV square-wave noise by noise simulator (pulse width 1 ㎲) |
± 500 V square-wave noise by noise simulator (pulse width 1 ㎲) |
|
Vibration |
0.75 mm double amplitude at frequency of 10 to 55 Hz (for 1 min) in each X, Y, Z direction for 1 hour |
|
|
Vibration (malfunction) |
0.5 mm double amplitude at frequency of 10 to 55 Hz (for 1 min) in each X, Y, Z direction for 10 min |
|
|
Shock |
300 m/s2 (≈ 30 G) in each X, Y, Z direction for 3 times |
|
|
Shock (malfunction) |
100 m/s2 (≈ 10 G) in each X, Y, Z direction for 3 times |
|
|
Relay life cycle |
Mechanical: ≥ 5,000,000 operations Electrical: ≥ 100,000 operations (250 VACᜠ 3 A resistive load) |
|
|
Ambient temperature |
- 10 to 55 ℃, storage: - 25 to 65 ℃ (no freezing or condensation) |
|
|
Ambient humidity |
35 to 85% RH, storage: 35 to 85% RH (no freezing or condensation) |
|
|
Protection rating |
IP20 (front part, IEC standard) |
|
