Feed material directly from original containers
DOPAG Transfer pumps for grease and oil
Depending on the application type, it may be useful to be able to supply material directly from the original containers using a transfer pump. DOPAG transfer pumps are double-acting pumps with a fast-switching air motor. It should be noted that the use of transfer pumps is always dependent on the material properties and the container type.
- Features
• Low viscosity material feeding via a bung hole
• Flow rate up to 1.0/6.0 litres/minute at 20 double strokes
• Pressure ratio up to 21:1/36:1
• Max. viscosity 80'000 mPas
• Sealing available in various sizes and material finish
- Technical Specifications
| Basic versions | TP20 505.05.30 | TP60 505.05.31 |
TP60 505.05.31 |
TP200 505.05.82 |
FP300 |
| Pressure ratio (drive) | 21:1 | 21:1 | 21:1 | 7.6:1 |
11:1/23.1/ 37:1 |
| Flow rate (at 20 double strokes) l/min | 0.80 | 0.80 | 0.80 | 2.24 | 6.00 |
| Material viscosity mPa s | 50.000 | 50.000 | 50.000 | 50.000 | 50.000 |
| Working pressure (max.) bar | 100(160) | 100(160) | 100(160) | 50(80) | 250 |
| Air consumption (at 20 double strokes) l/min | 142 | 142 | 142 | 142 |
450/900/ 1400 |
| Height retracted mm | 917 | 1150 | 1438 | 1438 | 1040 |
| Pump length mm | 339 | 577 | 860 | 860 | 600 |
| Weight without container kg | 13.2 | 14.9 | 14.9 | 14.9 | 38/42/46 |
| Maximum container height mm | 339 | 577 | 860 | 860 | - |
| Maximum container size L | 20 | 60 | 200 | 200 | - |
За пълната продуктова гама вижте тук
